Scale Setup

Scale

Scale
  1. First we need to set up the scale. On the scale, hold on the “#” button and turn it on
  2. It should show “TYPE – …”
  3. Check if it is showing TYPE 5
  4. If it’s not click on the “lb/oz” button to change the TYPE until it says TYPE 5
  5. Then hold on the “ZERO” button to save the settings
Tmnet-Webconfig

Printer:

Tm-T88Vi :

  1. Open the browser
  2. Go to printer’s IP (i.e. 10.1.10.155)
  3. Put in username and password: “epson”
  4. Look on the left for the option called “EpsonNet Config…”
  5. If it asks for username and password, they are “epson”
  6. Look on the left for the option called “Serial Communication Device”
  7. If the scanner is connected correctly it should show something under Device ID
  8. If nothing shows up Scale is not connected correctly
  9. Hit on “test” to test the scale
  10. Put in username and password
  11. On the left box, enter “ “, hit Send
  12. The screen should show the weight
  13. If not showing weight redo the setup

Tm-u220i :

  1. Open the browser
  2. Go to printer’s IP, add “/webconfig” (i.e. 10.1.10.155/webconfig)
  3. Put in username and password: “epson”
  4. Look on the left for Configuration
  5. Look under Web Service Settings
  6. Click Serial Communication Device
  7. If the scale is connected correctly it should show something under Device ID
  8. If nothing shows up Scale is not connected correctly
  9. Hit on “test” to test the scale
  10. Put in username and password
  11. On the left box, enter “ “, hit Send
  12. The screen should show the weight
  13. If not showing weight redo the setup

After connecting the scale :

  • Open the POS
  • Select an item that has “Enable Weight” on
  • Check if POS shows any weight of the item
  • If POS does not show any weight recheck the setup